Altec AT200AV
The Altec AT200AV telescopic aerial device gives you a dynamic hydraulic system, superb rotation and ideal outlet placement. It has a hydraulically extended boom and a two-stage telescopic, non-insulated aerial device, and you can start or stop the engine from both the upper and lower controls.
We recommend the wheel chock and fall protection system for improved safety. The platform is easy to step into from the ground, and the truck has a low life-cycle cost and a low travel height. Altec aerial devices meet or exceed all applicable ANSI standards as of the date of manufacture.
Our trucks come with all the safety equipment you need, and we provide professional supervision to keep everyone on the job safe, at hourly, daily and weekly rates.
| Working height | Up to 33 ft |
|---|---|
| Bucket floor height | About 28 ft |
| Side reach | 20.7 ft |
| Platform capacity | 350 lb |
| Platform size | 24 × 24 × 42 in |
| Rotation | 370°, non-continuous |
| Boom angle | −13.5° to 80° |
| Stowed travel height | 9.8 ft |
| Insulated | No |
| Power at the platform | 120 V outlets |
Heights are what our truck reaches on the job. The other figures come from Altec's spec sheet, which lists a 35.9 ft maximum working height for this model.
Download truck specs (PDF, 2.2 MB)-
Spec sheet, page 1
-
Spec sheet, page 2
